Build Quality

We strive to deliver superior quality in every aspect of all of our yachts. The quality of the build means your X-Yacht will be a pleasure to sail for years to come and is also the reason they have such exceptionally good re-sale values

Close Video

Vacuum infusion on Xp, X and Xc Ranges

On the Xp and X range where performance is more of an importance X-Yachts have always chosen to vacuum infuse the hulls using epoxy resin. This means that you can very precisely control the amount of resin used meaning there is the ideal amount of resin in all areas.

From 2019 and onwards, the Xc models are also built using epoxy infusion in the hull. X-Yachts hulls are post-cured or "oven-baked" to improve structural properties of the composite. Epoxy resin has higher mechanical and thermal stability than traditional polyester resins.

The vacuum infusion process involves the dry fibres being placed into the hull mould, these are then covered with an air tight plastic membrane which has a vacuum applied to it. The resin is then added through tubes and is ‘sucked’ through the fibres.

X-Yachts use Gurit Corecell M foam with all infused hulls. Due to the small cell size it minimises resin uptake during the infusion process reducing overall weight. The M foam core also has superior toughness and impact resistant characteristics. This allows for a reduction of core thickness for the same strength resulting in a lighter hull.

The combination of vacuum infusion, oven baked epoxy and the M foam core is the perfect choice when weight, stiffness and strength are the key factor.

Exterior Details


Above the water line X-Yachts use a UV resistant gel coat to ensure darker hull won’t fade over time. Below the waterline we use a clear gel-coat. This allows the builders to closely inspect the hull and ensure a perfect vacuum infusion.

Deck Equipment

All the deck equipment on board is supplied by industry leading suppliers ensuring that every aspect of an X-Yacht is reliable, easy to use and safe.

Integrated Waterlines

The famous 3 waterline stripes that have featured on X-yachts right from day one are integrated into the gel-coat rather than being painted on, ensuring they don't wear out and look tired.

Rod Rigging & Turnbuckles

Rod rigging is fitted as standard to all X-Yachts & has been upgraded to a larger diameter. X-Yachts uses racing turnbuckles which are much easier to adjust than the traditional type and look sleek & stylish

Teak Decks

Teak Decks

All our teak is hand selected from a sustainable source. On the decks, coach roof and cockpit sole we use 9mm, kiln dried, quarter sawn teak which results in a more stable and even deck. It is sealed with black, white or grey Sikaflex, which lasts for many years without becoming hard and brittle.

Whilst most yacht builders join their teak planks with caulked seams X-Yacht chooses the use glues finger joints. This creates a beautiful seamless look along the deck.

Engineering Installations

X-Yachts are designed for extensive sailing, whether blue water cruising or regatta racing you need to be sure that all the systems on board are reliable.

Our team of engineers, with over 30 years experience, fit all the systems from engines, generators, and air conditioning systems in house ensuring it is all fitted and installed to the highest standards.

Precise Tolerances

X-Yachts are designed in great detail before construction even starts. All mouldings are CNC’d using very accurate computer controlled machinery, consequently X-Yachts are built to very precise tolerances which are checked at every stage of the build process.

Oversized Battery Banks

Battery banks on X-Yachts are oversized to last longer than required and provide longer autonomous range. X-Yachts uses AGM batteries for improved reliablility, faster charging and they are less prone to sulfation. Lithium-ion batteries are also available as an upgrade on most yachts.

Centralised Electrical Panel

All electrical systems are routed to a single electrical panel for easy power management. Installations are rigorously tested to meet international safety and power standards.

System Access

System installations are fully modeled early in the design process to ensure good access to systems without compromising interior space. Having access to all the systems will allow you or you crew to work quickly and efficiently.



Our team of experienced and skilled carpenters carries out the interior joinery on all X-Yachts. While the styling may be contemporary, the joinery skills employed in constructing the yachts have been handed down through the generations. The boats are durable and easy to live on because the team use high quality materials and work to an agreed set of measurements chosen for their ergonomic advantages.

Top Suppliers

Top Suppliers

The loads placed on the rig and deck gear are considerable on board an X-Yacht because they carry larger than average sail plans. Industry leading suppliers like Andersen, Harken, Reckmann and Spinlock provide reliable components that are easy to use and maintain and are correctly sized for the loads involved. Lower specification items are cheaper to fit but would compromise the safety design goals of an X-Yacht.

Central Lift Point

Central Lift Point

X-Yachts are designed to be lifted using a single lift point that is integrated in the keel structure. This is ideal as it means there is no risk of damaging propellers and rudders as well as not scratching the hull with lifting strops. It also proves just how strong and well balanced the yachts are.

Previous Page


Next Page

Luxury Living