Brokerage

X-34

Yacht Summary

X-34

Sold

Standard Specification

DesignerNiels Jeppesen
Hull Length10.36 m34'0"
Waterline Length9.09 m29'10"
Beam (max)3.41 m11'2"
Draft1.90 m6'3"
Ballast - Std2,200 kg4,850 lbs
Displacement - Light5,300 kg11,684 lbs
Engine Power15 kW20 hp
Fuel Tank - Std79 ltr21 gal (US)
Water Tank - Std197 ltr52 gal (US)

Standard X-34 brochure

Details

Exterior Details

Hull

  • Built in sandwich with polyester resin n construction with structural foam core,
  • • Solid laminate in high stress areas in way of keel top, sail drive and rudder tube
  • • Steel frame – hot galvanized, high strength, laminated into hull absorb all loads from keel, mast and rigging
  • • Outer surface of hull in white sprayed white RAL 9010 Gelcoat with 3 blue waterlines
  • • Single point hoist for easy and safe lifting and launching of the yacht
  • • Structural bulkheads laminated to hull
  • • Keel securely bolted to reinforced keel structure
  • • Rudder stock mounted with needle and self aligning bearings
  • • Steering system with from « JEFA » , with gear box directly mounted on the sector of helml
  • • Stainless steel steering wheel with leather sheathing .

Deck

  • Non skid White gelcoat on the deck
  • Sprayhood
  • Electric windlass QUICK with remote control
  • Deck shower with hot and cold water

Sail Handling

  • • HARKEN winchs 2x 46.2 primary winches
  • • HARKEN winchs 2 x 40.2 for Geman Mainsheet system
  • • HARKEN winchs 2 x 40.2 for halyards ,
  • • Spinlock Jammer/clutches for halyards/control lines/reef lines
  • • Genoa tracks mounted on deck with adjustable Genoa cars and control lines
  • • Code 0 fixed point
  • • Sprayhood
  • • Carbon spinnaker pool

Sails

  • Racing Main NORTH SAILS 3DL, used
  • Genoa 110 % INCIDENCES
  • Lazybag and leazy jack
  • Spinnaker

Mast & Rigging

  • • Mast and boom aluminium JOHN MAST 2 spreaders
  • • Rod Rigging
  • • PROFURL with Rod forestay and furling under deck
  • • Backstay with Magic weehl and control line in the cockpit
  • • Asymetric spinnaker hardware and rigging with carbon boom

Accommodation

  • Mahogany wood inside. upolstery Alsace beige

Systems

Engine

  • YANMAR 3YM20 21 HP
  • Flexofold 2 blades folding propeller
  • Gazole tank 80 L

Plumbing

  • • Seacocks and through hull fittings are bronze ball and flush mounted
  • • Fresh water tank 200 L
  • • Hot water tank Isotherm 19 l. Tank can be heated either by main engine or immersion heater connected to shore power
  • • Holding tank, and deck outlet
  • • Pressurized freshwater system for hot and cold water throughout yacht
  • • Deck shower
  • • Fridge top opened 115 l with compressor
  • • ENO Gas cooker - 2 burner with oven

Electrical

  • • Main switch board with autolaitic fuses and 3 analogue VDO meters for fuel, water and battery voltage
  • • Service batterie x 2
  • • Engine spiral-cell battery
  • • Shore power installation with shore power inlet mounted in cockpit
  • • AC distribution box with circuit breaker/10A fuse, 230V AC socket and switches for hot water heater and battery charger
  • • EBERSÄCHER heater

Electronics

  • ◦ RAYMARINE Electronic
  • ◦ Log- Speed- Deepth - Wind sensors
  • ◦ 3 x ST60 in the coach roof
  • ◦ Autopilot RAYMARINE 6001 with JEFA drive and wireless control S100
  • ◦ Chart plotter RAYMARINE C70 on the chart table
  • ◦ VHF SIMRAD RD68 DSC
  • ◦ AIS
  • ◦ Radio CD MP3 JVC with HP int ext