Brokerage

X-40

Yacht Summary

X-40

Sold

Contact X-Yachts France

To discuss your requirements call X-Yachts France on +33 (0) 494 45 37 33 or complete the form below.

Standard Specification

DesignerNiels Jeppesen
Hull Length12.19 m40'0"
Waterline Length10.17 m33'4"
Beam (max)3.80 m12'6"
Ballast - Std3,200 kg7,055 lbs
Displacement - Light7,450 kg16,424 lbs
Engine Power30 kW41 hp

Standard X-40 brochure

Details

Exterior Details

Hull

  • • Built in sandwich with polyester resin n construction with structural foam core, Bi-directional and uni directional E-glass
  • • Solid laminate in high stress areas in way of keel top, sail drive and rudder tube
  • • Structural bulkhead in marine plywood varying of thickness from 9-22 mm.
  • • Steel frame – hot galvanized, high strength, laminated into hull absorb all loads from keel, mast and rigging
  • • Outer surface of hull in white sprayed white RAL 9010 Gelcoat with 3 blue waterlines
  • • Single point hoist for easy and safe lifting and launching of the yacht
  • • Structural bulkheads laminated to hull
  • • Hull recessed portlights - (6 pcs)
  • • Keel securely bolted to reinforced keel structure
  • • Deck built in sandwich construction with structural foam and bi and uni-directional E – Glass cloth, white gelcoat
  • • Rudder blade of sandwich construction laminated
  • • Rudder stock constructed of solid, high aluminium with welded wings
  • • Rudder stock mounted with needle and self aligning bearings
  • • Steering system with from « JEFA » , with gear box directly mounted on the sector of helmle
  • • Aluminium JEFA steering wheel 1,70 m diameter

Deck

  • • Teak, on side deck, cockpit sole seats and bathing plateform. Bulwark with teak capping incorporated in deck/hull design
  • • Anchor locker -
  • • Gas spring fitted to forward and both aft cockpit lockers
  • • Moorings cleats in stainless steel lounted fore, including stainless steel protection rails
  • • Bathing ladder in stainless steel integrated in transom platform
  • • Stainless Steel handrails on coachroof
  • • Sprayhood on stainless steel arch

Sail Handling

  • • Stainless Steel Andersen 2 x ST 46.2 primary winches
  • • Stainless Steel Andersen 2 x ST 40.2 for Geman Mainsheet system
  • • Stainless Steel Andersen 2 x ST 40.2 for halyards ,
  • • Spinlock Jammer/clutches for halyards/control lines/reef lines (x9)
  • • HARKEN Carbofoil foretsay
  • • Genoa tracks mounted on deck with adjustable Genoa cars and control lines
  • • Symetric spinnaker hardware and rigging with carbon boom

Sails

  • • Offshore 2 reefing lines Racing mainsail Membrane 2017
  • • 100 % Genoa light, medium and heavy
  • • ORC and TMT
  • • Heavy Spinnaker caelage
  • • Medium Spinnaker cabelage
  • • Head Medium Spinnaker
  • • Code 0 with furler

Mast & Rigging

  • • Z / MARECHAL white painted carbon mast and carbon boom 2017 double triple carbon spreader keel stepped mast,
  • • Discontinuous rod rigging with rod turnbuckles replaced 2017
  • • Telescopic vang with outer purchase block system
  • • Fiber backstay fitted with hydraulic NAVTEC backstay adjuster
  • • HARKEN Carbofoil foretsay

Keel

  • Sport keel 2.40m with heavy bulb draftmade of antimony hardened lead bulb bolted and glued to cast iron fin

Accommodation

3 Cabins Classic layout

  • o Large square with large folding trapezoid table 120 x 120 x 90, large bench on each edge of the square 200 cm
  • o Top grade teak, varnished and hand sanded satin finish
  • o Companionway with curved teak steps.
  • o Handrails at the entrance and along the roof, deck panels opening onto the roof and front cabin
  • o Upholstery of the saloon in Alcantara
  • o Front cabin owner with large double berth with curved laminated battens and high-density mattress
  • Cover in aft cabins
  • o Chart table 95x70 cm to port , electrical panel and locations for navigation equipment and storage.
  • o Two aftcabins with large double berths with curved laminated battens, high-density mattress with protective cover in skaii
  • o Bathroom with shower, marine toilett and hoding tank
  • o Kitchen in L , sink 2 stainless steel bins, shelves and closed teams offers many storage

Systems

Engine

  • • Engine YANMAR 3JH4E 37 Hp, water cooled diesel engine with S-Drive
  • • Special engine compartment with sound insulation
  • • FLEXOFOLD folding propeller, 3-bladed bronze
  • • Gasoil tank 80 L

Plumbing

  • • Seacocks and through hull fittings are bronze ball and flush mounted
  • • Fresh water stainless steel tank (180 litre)
  • • Hot water tank Isotherm 19 l. Tank can be heated either by main engine or immersion heater connected to shore power
  • • Pressurized freshwater system for hot and cold water throughout yacht
  • • Deck shower
  • • Fridge top opened 125 l built in Isotherm SP, accumulator plate and compressor
  • • Gimballed Gas cooker - 3 burner Eno GASCOGNEcooker with oven

Electrical

  • • Main switch board with automatic fuses and 3 analogue VDO meters for fuel, water and battery voltage
  • • Gel services batteries Gel HAZE 2017 2 x 80 amp
  • • Separate engine spiral-cell battery
  • • Shore power installation with shore power inlet mounted in cockpit
  • • AC distribution box with circuit breaker/10A fuse, 230V AC socket and switches for hot water heater and battery charger
  • • Automatic battery charger 12V/30 Ah
  • • EBERSPACHER D4 heater
  • • General lights and dome spotlights integrated in inner liner

Electronics

  • o ST 6001 autopilot gyro with JEFA drive unit
  • o NKE electronic with TL25 display on mast bracket
  • o Sensors for log – speed – depth – carbowind
  • o PC NMEA multilink
  • o Ray 54 VHF
  • o CD player + 2 loudspeakers in main cabin
  • o Cockpit HP with automatic switch VHF / Hifi