Xp 50

Yacht Summary

  • Manufacturer: X-Yachts
  • Model: Xp 50
  • Build Year: 2012
  • Lying: Barcelona, Spain
  • Price: Sold
  • Contact: Eddy Verbinnen
Xp 50



To discuss your requirements call on or complete the form below.

The specification shows clearly that this boat was engineered specially and very clever.

In 2014 the yacht won under IRC 1 the famous “Les Voiles de Saint-Tropez”.  The owner raced her afterwards only two times: Giraglia 2016 and in 2018, both were in very light wind conditions.

She mainly has been used for sailing holidays. However a sporty family can have a lot of fun with her. Due to all she is extremely stiff, so easy to keep upright. According the owner she sails 8,7 knots close hauled in windforce 4 with flat sea.

Survey report

On demand we can send you a detailed survey report from 2016 with an excellent conclusion. We are very confident that a new survey will have the same conclusions.

Standard Specification

DesignerX-Yachts Design Team
Hull Length14.99 m49'2"
Waterline Length13.31 m43'8"
Beam (max)4.43 m14'6"
Draft3.00 m9'10"
Ballast - Std5,600 kg12,346 lbs
Displacement - Light13,600 kg29,983 lbs
Engine Power55 kW75 hp
Fuel Tank - Std300 ltr79 gal (US)
Water Tank - Std550 ltr145 gal (US)


Exterior Details


  • Epoxy treatment of the hull original from the yard
  • High ballast ratio: 43%
  • Hull built in epoxy with carbon frame integrated in the hull


  • Teak side decks
  • Folding spring cleats mid ship
  • Sprayhood grey
  • Bimini aft cockpit grey
  • Race stanchions
  • Outboard engine bracket
  • Anchor windlass with second windlass remote control and chain counter
  • Carbon bowsprit, clear coated, longer then standard
  • Carbon mast, boom, spinnaker boom and carbon bow sprit changed to Whitel
  • The garage door for the dinghy is specially made in carbon
  • Inner forestay removable
  • Lazy jacks
  • Three colour top light
  • Extra spinnaker halyard fractional
  • Extra spinnaker halyard mathead (so three in total)
  • Special Holmatro hydraulic backstay with multifunction HCP panel
  • Hydraulic vang and inner forestay
  • Hawk antenna VHF/DVD
  • Radar en radar pole in carbon for installation on the aft deck are at disposal

Sail Handling

  • Electrical winches (4)
  • Sail handling pack 2 : symmetric spinnaker package
  • Barberhaul grand prix system


  • Ronstan series 26 mainsail batten cars for Ronstan track on carbon mast
  • Mainsail for cruising, fully battened in North 3DI, with second reefing line at 70%
  • Jib 1 for cruising on furling system (OK till 25 knots wind)
  • Jib 3 on removable forestay (+ 25 knots wind)
  • Storm jib
  • Set of North racing sails in 3DI: mainsail, genoa, medium jib, solent, 3 different assymetric spinnakers.


  • Sea berths in aft cabins
  • Nightlight saloon/owner red (4 pieces)
  • Wood front panel on aft bunks
  • Main cabin cushions: Alsace Ivory
  • Front and aft cabin cushions: Nantes grey white
  • Refrigerator top open
  • Extra front open fridge 85 l.
  • Eberspächer heating system D5



  • Volvo 75 hp with folding propeller.


  • Battery charger combi 12/2000-80 A Victron
  • BTM III battery monitor with later upgrade to recent Mastervolt Easyview 5 system
  • Galvanic isolator
  • Five 220 volt sockets
  • Two 12 volt sockets
  • Multimedia Radio + DVD
  • Bose loudspeakers in cockpit
  • Retractable bowthruster
  • Special electrical upgrade from standard 12 to 24 volt
  • Battery Exide GEL for 24v bowthruster and electrical winches
  • The Mastervolt batteries are built in under the saloon floor for extra stability
  • New service batteries Mastervolt Lithium 24/5000
  • Alpha pro master bus 3 12/24 v
  • new software from Mastervolt network
  • Watermaker easy and efficient, controlled from the heads


  • Two consoles in front of steering wheels with B&G chartplotter 9”
  • Five maxi B&G Zeus displays at the mast on a carbon holder for H 3000 multi function System for speed, echosounder and wind
  • VHF/AIS Simrad
  • Furuno Navtex NX300
  • Automatic pilot B&G ACP2

Additional Information

  • To be done:
  • replacement of mainsail cover
  • new cruising jib with UV protection
  • replacement of sprayhood cover
  • replacement of navigation light starboard side