fbpx
Close Video

The Xc 50 is the largest model in the Xcruising range and offers a wide range of custom options to allow owners to create an elegant personalised yacht.

Following extensive feedback from a large group of Xc owners, as well as our own experience over the last 10 years, 2019 will see the launch of the ‘X-Yachts 40 Years Anniversary’ edition of the Xc 45. The ‘Anniversary’ edition of the Xc 45 builds upon the success of the Xcruising range with an updated specification implementing improvements from feedback gathered from a fleet of over 300 Xc yachts worldwide.

From this edition of the Xc 50 and onwards, the Xc models are built using epoxy infusion in the hull. X-Yachts hulls are post-cured or “oven-baked” to improve structural properties of the composite. Epoxy resin has higher mechanical and thermal stability than traditional polyester resins. Added value to this production method is weight reduction.

Exterior upgrades include new optional jib self-tacker design, composite bowsprit and new colourways.

Interior upgrades include Nordic oak furniture and new upholstery types, cushion design and new interior fittings throughout.

Systems upgrade highlights include new tank displays showing remaining volume in litres and upgraded ambient lighting.

This yacht is designed for someone who dreams of cruising but does not want to go slowly

Juan Pablo del Solar Kolbach, Xc 50 Owner (Chile)

Exterior

Underway, the high stability Xc 50 is generously canvassed, but with a high specification deck layout and controllable rig, designed to be easily managed for unmatched sailing performance.

The Xc 50 will reach maximum hull speed in approximately 9 knots of true wind speed, using the 140% overlapping genoa. The sail plan has been created specifically for long distance cruising, and includes a 106% non-overlapping genoa, and integrated 94% self-tacking jib.

The mainsail comes with slab-reefing as standard, or there is an option of in-boom furling.

The Xc 50 is also easily sailed short-handed, with under-deck halyards led aft to self-tailing winches (including electric options) and a secure central console.

Exterior

Bathing Platform

The large bathing platform is operated by a purchase block system. Below deck storage for a liferaft is accessed from the bathing platform.

Cockpit Table

The cockpit table with central storage, includes compass and handrail with drink holders. Optional chart plotter and autopilot control can be fitted into the aft end of the table.

Mainsheet System

Split mainsheet passes below deck on both sides and is led back to the aftmost cockpit winches. Optional vacuum applied teak on the coachroof.

Stainless Steel Winches

Stainless steel self-tailing Andersen Winches, which can be upgraded to be electrical powered are part of Xc 50's comprehensive standard quality.

Interior Luxury

Interior Luxury

Custom options include an extra large owners’ cabin with ensuite heads to port, incorporating space for appliances such as a washing machine.

Alternatively the Xc 50 can accommodate a forepeak crew cabin, and central master heads.

Aft there are two roomy double cabins, with the option of both ensuite.

Alternatively an extra-spacious galley can be created with additional worktop space to port, and a single aft heads with shower.

The galley features Corian worktop, space for two refrigerators, optional microwave, and Nespresso machine.

In heads, the Xc 50 introduces new Corian worktops, new sink design and angled make-up mirror.

Interior Surfaces

Bulkhead and Furniture Surfaces

Quarter sawn high quality wooden veneers, lightly sanded and varnished, from Italian suppliers. As standard furniture is built in Nordic Oak offering a light modern look. More traditional teak is also available.

Nordic Oak (Standard)

Nordic Oak (Standard)

Teak (Optional)

Teak (Optional)

Floorboards

Below samples have a hard wearing top surface of laminate imitating wooden veneers. As an alternative, top surface of genuine wooden veneer (as Bulkhead & Furniture) is also available.

Teak without koto (Standard)

Teak without koto (Standard)

Teak with koto (Optional)

Teak with koto (Optional)

Walnut (Optional)

Walnut (Optional)

Galley Worktop

The worktop is made of an advanced composite of natural minerals and pure acrylic polymer which creates a stone-hard, luxurious surface.

Camoan White Corian (Standard)

Camoan White Corian (Standard)

Black Quartz Corian (Optional)

Black Quartz Corian (Optional)

Upholstery and Mattress Fabrics

Just Fleckless is easy to clean. Each yarn is coated with a newly developed stain guard before processing without compromise to feel or appearance. 85% Polyester, 15% Viscose

750 Olive Grey (Standard)

750 Olive Grey (Standard)

01 Nature (Optional)

01 Nature (Optional)

05 Camel (Optional)

05 Camel (Optional)

403 Bambus (Optional)

403 Bambus (Optional)

710 Moon Grey (Optional)

710 Moon Grey (Optional)

10 Navy (Optional)

10 Navy (Optional)

 

Alsace and Nubilux; Extremely easily cleaned. 100% Polyester Microfiber Fabrics has knitted back and velor surface. Microfiber is breathable, durable and abrasion resistant.

Alsace Blue (Optional)

Alsace Blue (Optional)

Alsace Ivory (Optional)

Alsace Ivory (Optional)

Alsace Sand (Optional)

Alsace Sand (Optional)

Nubilux 709 Argent (Optional)

Nubilux 709 Argent (Optional)

360° Experience

Xc 50

Specifiche

Designer X-Yachts Design Team
Length Overall 15.61 m 51'3"
Lunghezza scafo 14.99 m 49'2"
Waterline Length 13.51 m 44'4"
Baglio (max) 4.6 m 15'1"
Pescaggio ridotto 1.95 m 6'5"
Pescaggio standard 2.35 m 7'9"
Air Draft (not including Windex) 23.1 m 75'9"
Peso del bulbo - standard 7220 kg 15917 lbs
Dislocamento - leggero 16085 kg 35461 lbs
Motore (Diesel) 80.9 kW 110 hp
Serbatoio gasolio - standard 614 ltr 162 gal(US)
Serbatoio acqua- standard 808 ltr 213 gal(US)
water

Price

The Xc 50 is offered at a price of *

*All prices are exclusive of VAT and may be subject to other taxes in your country. Please contact your local dealer if you require further information.